Pro-Tec System One Control Unit – Monitors all doors and any movement of trailer by means of adjustable accelerometer and pin switches. Contained in a weather resistant plastic mounting box.
Basic system includes:
Brake safety toggle switch
3 - Pin type door switches
3 - Door switch brackets
5 - Crimp connectors
1 - Double membrane entry seal
Insurance rebate card
The PRO-TEC System is designed to monitor and protect the trailer and it's contents. Any movement of the trailer will be detected by the built in, adjustable accelerometer, or the opening of a door. This will cause the electrical brakes of the trailer to be applied in addition to the sounding of the ~120db waterproof siren provided, and the flashing of your trailers running lights. The PTS-2 is also equipped with a low battery alert system.
The system is remotely controlled and comes complete with all hardware and universal door switches. You supply the wire and an automotive type battery, preferably mounted inside the trailer. Optional switches and motion detectors are available for professional installations. (Motion detector is to be used to sense motion inside the trailer, NOT the motion of the trailer). Motion detector has both K-band microwave and PIR technology. PRO-TEC System has been specially designed for easy installation.
Locate your trailer
Be alerted if the alarm is set off with real time alerts via e-mail
Remotely arm/disarm the alarm via computer, smartphone or tablet.
System is mounted in a 10"x 7" container with the brake safety toggle switch also mounted in the box.
Our GPS device uses the latest LTE services, unlike some that utilize an expiring 3G service. System includes an antenna that must be mounted on the exterior of the trailer.
Solar power highly recommended to keep battery powered.
Dual Technology with Micro-controller for False Alarm Immunity. The latest generation motion sensor uses two technologies (microwave and PIR) plus a micro-controller provides outstanding false alarm immunity without compromising detection. Motion detector is to be used to sense motion inside the trailer, not the motion of the trailer.